APE M8 Cam Kit – Alpha Performance Engines

CYCLE-RAMA INC / A.P.E camshaft

CR480-OG

Cycle-Rama Inc. "Original" CR480 is a Drop In Cam for Stock Spring Height. Power Range Between 2,000 to 5,000. This Cam Makes Loads of Low Range Torque. Works Great As Bolt-In Cam for The Factory 107/114/117. Our Most Successful M8 Cam!

CR480-OG Cam Install Kit

All The Essentials Parts Needed For The Install. Inclusions CycleRama CR480 Cam Bearing High Capacity Lifters Adjustable Pushrods Cam Install Gasket Kit

CR480-OG Power Plus Kit

All the essentials parts needed for the install, plus billet lifter cuffs and a high flow cast aluminum inlet manifold. The cast aluminum inlet manifold is far more tolerant to heat and will add 3-5hp vs the stock plastic manifold.

DYNO CHART COMPARISON

CUSTOM BIKE BUILDS

Previous slide

Next slide

CR483

APE CR483 Exclusive Grind Developed In Collaboration With Wes From Cycle-Rama.Inc, Bolt-In Grind For Your Factory 107/114/117, Broad Torque Curve That Comes In Early, Aggressive “Choppy” Idle, 30+ Horsepower Gains When Combined With A Quality Intake, Exhaust & Tune, 2200 To 5700

CR483 Cam Install Kit

All The Essentials Parts Needed For The Install. Inclusions CycleRama / APE CR483 Cam Bearing High Capacity Lifters Adjustable Pushrods Cam Install Gasket Kit

CR483 Power Plus Kit

All the essentials parts needed for the install, plus billet lifter cuffs and a high flow cast aluminum inlet manifold. The cast aluminum inlet manifold is far more tolerant to heat and will add 3-5hp vs the stock plastic manifold.

DYNO CHART COMPARISON

CUSTOM BIKE BUILDS

Previous slide

Next slide

CR485

APE Exclusive grind developed in collaboration with Wes from Cycle-Rama.Inc, NEW lobe profile, .485″ lift (largest allowable lift with stock valve springs), Broad power band and carries horsepower to 6000rpm+, maintains very respectable low end torque, HUGE gains in performance when combined with quality supporting parts.

CR485 Cam Install Kit

All The Essentials Parts Needed For The Install. Inclusions CycleRama / APE CR485 Cam Bearing High Capacity Lifters Adjustable Pushrods Cam Install Gasket Kit

CR485 Power Plus Kit

All the essentials parts needed for the install, plus billet lifter cuffs and a high flow cast aluminum inlet manifold. The cast aluminum inlet manifold is far more tolerant to heat and will add 3-5hp vs the stock plastic manifold.

DYNO CHART COMPARISON

CUSTOM BIKE BUILDS

Previous slide

Next slide

SPECIAL GRIND CAM

CR515

CR557

Click Here

Previous slide

Next slide